Residential · St. Louis, MO
Metallic epoxy flooring turns plain concrete into a seamless, high-gloss surface with depth, movement, and custom color. Elite Epoxy St. Louis installs and repairs metallic epoxy systems for garages, basements, showrooms, offices, and retail floors, with St. Louis scheduling and a clear written scope.
Prep decides whether metallic epoxy looks like a showroom or like a patch job. We start with a site check for moisture vapor transmission, surface strength, and cracks, then protect walls and transitions before diamond grinding with HEPA dust control to a clean CSP profile. Oil spots and tire pickup areas get degreased and mechanically opened, then we repair spalls and control joints with 100 percent solids epoxy gel or polyurea crack filler. A moisture-mitigating epoxy primer or vapor barrier goes down when needed, followed by an epoxy basecoat tinted to your design so the metallic pigments have an even, predictable canvas.
Metallic effects are created while the epoxy is open, so temperature, humidity, and airflow matter. In St. Louis, we plan around seasonal swings to keep cure times stable and to avoid amine blush, fisheyes, or roller lines, especially in basements and attached garages. Metallic pigment is broadcast and manipulated with squeegees, rollers, and leaf blowers for marbling, veining, or cloud patterns, then we lock it in with a clear 100 percent solids epoxy and a high-wear urethane or polyaspartic topcoat. You can choose gloss level, slip resistance (aluminum oxide or polymer grit), and performance options like UV-stable topcoats to reduce ambering in sunlit rooms.
St. Louis customers choose us because we treat metallic epoxy flooring like a coating system, not a paint job. Our crews focus on surface prep, moisture control, and film build, using commercial grinders, calibrated mixing, and batch tracking so color and movement stay consistent across large areas. We handle repairs the right way, feathering edges, re-priming, and re-clearing so blends disappear as much as possible instead of telegraphing through the finish. You get straightforward communication, clean job sites, and a free written estimate that spells out the system, steps, and timeline.
After installation, we do a final walkthrough with you under good lighting to confirm pattern flow, sheen, edges, and transitions at doors, drains, and baseplates. We review cure and return-to-service times, typical ranges are light foot traffic in 24 hours and vehicles or heavy loads in 48-72 hours depending on the topcoat and conditions. You also get care guidance for metallic epoxy flooring, including pH-neutral cleaners, soft pads, and how to avoid scratching from grit and metal casters. If your floor needs touch-ups later, we can re-topcoat to refresh gloss and add wear protection without replacing the entire system.
Many residential garage floors are completed in 1-2 days depending on repairs, humidity, and the coating system. Cure time varies by product, but we provide a clear schedule for foot traffic and vehicle return in the written estimate.
Sometimes, but it depends on adhesion and compatibility. We typically grind to remove failed coating, then re-profile the slab and rebuild the system with the correct primer and topcoats.
We repair cracks and spalls during prep using crack-chasing, joint cleaning, and patch materials selected for the condition. Some moving cracks can telegraph over time, but proper repair greatly improves appearance and performance.
Standard epoxy can amber with UV exposure. For sunlit garages or exterior-adjacent areas, we recommend UV-stable polyaspartic or polyurethane topcoats to help reduce yellowing and chalking.
Yes. We provide a free written estimate that outlines prep, system options, decorative choices, timeline, and care notes so you can compare apples to apples.
Metallic epoxy flooring is a multi-layer resin system designed to deliver a seamless, reflective finish with a 3D, marbled look. It is popular in finished basements, man caves, retail, salons, offices, and showroom spaces because it cleans easily and offers nearly unlimited color and movement options. Elite Epoxy St. Louis installs new metallic epoxy floors and repairs failed coatings, peeling areas, and worn topcoats with proper prep, moisture control, and commercial-grade materials.
A great metallic epoxy floor starts below the shine. We mechanically profile concrete to the right Concrete Surface Profile (CSP), then address cracks, spalls, and soft concrete before primer. If moisture is present, we specify a moisture-mitigating epoxy primer to reduce blistering and delamination. From there we build the metallic system with a pigmented basecoat, metallic epoxy layer, and clear coats for depth and protection, targeting the film build needed for the traffic level.
Repairs depend on why the coating failed. When metallic epoxy flooring is peeling, bubbling, or chipping, we identify whether the cause is moisture vapor, contamination, improper prep, or worn topcoat. We can spot repair isolated failures, re-clear for uniform gloss, or fully remove failed coatings and rebuild the system when needed. Matching metallic patterns is more art than math, but careful feathering, re-priming, and re-topcoating can make repairs blend well.
If you want a floor that stands out without grout lines or seams, metallic epoxy is a strong option when installed on a properly prepared slab. Share your space type, lighting, and traffic needs, and we will recommend colors, slip resistance, and a topcoat that fits the job. Request a free written estimate for metallic epoxy flooring installation or repair in St. Louis.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in St. Louis. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
